Useful Latest Leads4pass IT Exam Dumps Questions And Answers Update

Lead4Pass 201 Dumps is the best solution to pass the F5 201 – TMOS Administration Exam.

The F5 201 Dumps with 91 up-to-date exam questions and answers have been released from Lead4Pass.com, with PDF files and a VCE mock exam engine, as well as 365 days of free updates to help you truly pass the F5 201 – TMOS Administration exam.

Take advantage of the F5 201 – TMOS Administration exam solution, using F5 201 dumps https://www.leads4pass.com/201.html, to help you win.

Experience some F5 201 Dumps exam questions online:

Tips: The best experience is the test, the answer will be announced at the end of the article

QUESTION 1:

Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the BIG-IP?

A. No SSL certificates are required on the BIG-IP.

B. The BIG-IP\’s SSL certificates must only exist.

C. The BIG-IP\’s SSL certificates must be issued from a certificate authority.

D. The BIG-IP\’s SSL certificates must be created within the company hosting the BIG-IPs.

QUESTION 2:

Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?

A. The SNAT must be enabled for all VLANs.

B. The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.

C. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.

D. The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.

QUESTION 3:

Which two statements describe differences between the active and standby systems? (Choose two.)

A. Monitors are performed only by the active system.

B. Failover triggers only cause changes on the active system.

C. Virtual server addresses are hosted only by the active system.

D. Configuration changes can only be made on the active system.

E. Floating selfIP addresses are hosted only by the active system.

QUESTION 4:

A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address

when the associated packet is sent to the pool member?

A. 200.200.1.1

B. 150.150.10.11

C. Floating self IP address on VLAN where the packet leaves the system

D. Floating self IP address on VLAN where the packet arrives on the system

QUESTION 5:

Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing? (Choose three.)

A. CLIENT_DATA

B. SERVER_DATA

C. HTTP_REQUEST

D. HTTP_RESPONSE

E. CLIENT_ACCEPTED

F. SERVER_SELECTED

G. SERVER_CONNECTED

QUESTION 6:

Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server\’s destination port were not 443?

A. SSL termination could not be performed if the virtual server\’s port was not port 443.

B. Virtual servers with a ClientSSL profile are always configured with a destination port of 443.

C. As long as client traffic was directed to the alternate port, the virtual server would work as intended.

D. Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port
443.

QUESTION 7:

Which two methods can be used to determine which BIG-IP is currently active? (Choose two.)

A. The bigtop command displays the status.

B. Only the active system\’s configuration screens are active.

C. The status (Active/Standby) is embedded in the command prompt.

D. The ifconfig a command displays the floating addresses on the active system.

QUESTION 8:

The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B. Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection?

A. 10.10.20.1:80

B. 10.10.20.2:80

C. 10.10.20.3:80

D. 10.10.20.4:80

E. 10.10.20.5:80

QUESTION 9:

Which statement is true regarding failover?

A. Hardware failover is disabled by default.

B. Hardware failover can be used in conjunction with network failover.

C. If the hardware failover cable is disconnected, both BIGIP devices will always assume the active role.

D. By default, hardware fail over detects voltage across the failover cable and monitors traffic across the internal VLAN.

QUESTION 10:

Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.

A. Most templates, such as http and tcp, are as effective as customized monitors.

B. Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.

C. Most templates, such as https, should have the receive rule customized to make the monitor more robust.

D. While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.

QUESTION 11:

When configuring a pool member\’s monitor, which three association options are available? (Choose three.)

A. inherit the pool\’s monitor

B. inherit the node\’s monitor

C. configure a default monitor

D. assign a monitor to the specific member

E. do not assign any monitor to the specific member

QUESTION 12:

How is MAC masquerading configured?

A. Specify the desired MAC address for each VLAN for which you want this feature enabled.

B. Specify the desired MAC address for each selfIP address for which you want this feature enabled.

C. Specify the desired MAC address for each VLAN on the active system and synchronize the systems.

D. Specify the desired MAC address for each floating selfIP address for which you want this feature enabled.

QUESTION 13:

Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all?

A. The process should always be run from the standby system.

B. The process should always be run from the system with the latest configuration.

C. The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.

D. Multiple files, including /config/bigip.conf and /config/bigip_base.conf, are synchronized (made identical) each time the process is run.

Verify the answer:

Numbers:

Q1

Q2

Q3

Q4

Q5

Q6

Q7

Q8

Q9

Q10

Q11

Q12

Q13

Answers:

A

C

CE

C

ACE

C

AC

A

B

C

ADE

A

C

[Google Drive] Download the F5 201 Dumps exam questions and answers above:https://drive.google.com/file/d/1cj81qXpy3vJbuAugA3d_VWV0tNO5JqqA/

I can confidently tell all candidates: Lead4Pass 201 Dumps exam questions can help you improve your study efficiency, save time and exam cost, and ultimately help you successfully pass the F5 201 – TMOS Administration Exam.

Based on the above, so the best solution for the F5 201 – TMOS Administration Exam is to practice F5 201 Dumps https://www.leads4pass.com/201.html (91 Q&A).

Newly shared F5 201 exam learning preparation program! Get the latest 201 exam questions and exam dumps pdf for free! 100% pass the exam to select
the full F5 201 dumps https://www.leads4pass.com/201.html the link to get VCE or PDF. All exam questions are updated!

Lead4pass offers the latest F5 201 PDF Google Drive

[Latest updates] Free F5 201 dumps pdf download from Google Drive: https://drive.google.com/file/d/1-vorDUOrwVxSnQ-j5J3fj48gbyGmUvIo/

latest updated F5 201 exam questions and answers

QUESTION 1
Given that VLAN failsafe is enabled on the external VLAN and the network that the active BIG-IP\\’s external VLAN is
connected to has failed, which statement is always true about the results?
A. The active system will note the failure in the HA table.
B. The active system will reboot and the standby system will go into active mode.
C. The active system will failover and the standby system will go into active mode.
D. The active system will restart the traffic management module to eliminate the possibility that BIG-IP is the cause for
the network failure.
Correct Answer: A

 

QUESTION 2
A site needs a virtual server that will use an iRule to parse HTTPS traffic based on HTTP header values. Which two
profile types must be associated with such a virtual server? (Choose two.)
A. TCP
B. HTTP
C. HTTPS
D. ServerSSL
Correct Answer: AB

 

QUESTION 3
Which must be sent to the license server to generate a new license?
A. the system\\’s dossier
B. the system\\’s host name
C. the system\\’s base license
D. the system\\’s purchase order number
Correct Answer: A

 

QUESTION 4
Where is persistence mirroring configured?
A. It is always enabled.
B. It is part of a pool definition.
C. It is part of a profile definition.
D. It is part of a virtual server definition.
Correct Answer: C

 

QUESTION 5
A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server
has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of
200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1
sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool
member?
A. 200.200.1.1
B. 150.150.10.11
C. Floating self IP address on VLAN where the packet leaves the system
D. Floating self IP address on VLAN where the packet arrives on the system
Correct Answer: B

 

QUESTION 6
Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to
use.
A. Most templates, such as http and tcp, are as effective as customized monitors.
B. Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.
C. Most templates, such as https, should have the receive rule customized to make the monitor more robust.
D. While some templates, such as ftp, must be customized, those that can be used without modification are not
improved by specific changes.
Correct Answer: C

 

QUESTION 7
Where is the loadbalancing mode specified?
A. within the pool definition
B. within the node definition
C. within the virtual server definition
D. within the pool member definition
Correct Answer: A

 

QUESTION 8
Assuming other failover settings are at their default state, what would occur if the failover cable were to be disconnected
for five seconds and then reconnected?
A. As long as network communication is not lost, no change will occur.
B. Nothing. Failover due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
C. When the cable is disconnected, both systems will become active. When the voltage is restored, unit two will revert to standby mode.
D. When the cable is disconnected, both systems will become active. When the voltage is restored, both systems will
maintain active mode.
Correct Answer: C

 

QUESTION 9
A site wishes to perform source address translation on packets arriving from the Internet for clients using some pools
but not others. The determination is not based on the client\\’s IP address, but on the pool they are load balanced to.
What could best accomplish this goal?
A. A SNAT for all addresses could be defined, and then disable the SNAT processing for select pools.
B. The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.
C. For each virtual server, regardless their default load balancing pools, association with SNAT pools could vary
dependent upon need.
D. The decision to perform source address translation is always based on a client\\’s address (or network). Thus, this
goal cannot be achieved.
Correct Answer: A

 

QUESTION 10
Which statement is true regarding failover?
A. Hardware failover is disabled by default.
B. Hardware failover can be used in conjunction with network failover.
C. If the hardware failover cable is disconnected, both BIGIP devices will always assume the active role.
D. By default, hardware fail over detects voltage across the failover cable and monitors traffic across the internal VLAN.
Correct Answer: B

 

QUESTION 11
Which two statements describe differences between the active and standby systems? (Choose two.)
A. Monitors are performed only by the active system.
B. Failover triggers only cause changes on the active system.
C. Virtual server addresses are hosted only by the active system.
D. Configuration changes can only be made on the active system.
E. Floating selfIP addresses are hosted only by the active system.
Correct Answer: CE

 

QUESTION 12
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool
is marked available. If a pool is marked available (green) which situation is sufficient to cause this?
A. All of the pool member nodes are responding to the ICMP monitor as expected.
B. Less than 50% of the pool member nodes responded to the ICMP echo request.
C. All of the members of the pool have had their content updated recently and their responses no longer match the
monitor.
D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the
custom monitor. The other respond as expected.
Correct Answer: D

 

QUESTION 13
If a client\\’s browser does not accept cookies, what occurs when the client connects to a virtual server using cookie
persistence?
A. The connection request is not processed.
B. The connection request is sent to a pology server.
C. The connection request is loadbalanced to an available pool member.
D. The connection request is refused and the client is sent a “server not available” message.
Correct Answer: C

Summarize:

Examkraft free to share F5 201 exam questions, 201 pdf, 201 exam video! Lead4pass updated exam questions and answers throughout the year! Make sure you pass the exam successfully. Select lead4Pass 201 to pass the F5 201 exam “TMOS Administration“.

ps. Latest update Lead4pass 201 exam dumps: https://www.leads4pass.com/201.html (91 Q&As)

[Latest updates] Free F5 201 Dumps pdf download from Google Drive: https://drive.google.com/file/d/1-vorDUOrwVxSnQ-j5J3fj48gbyGmUvIo/