Lead4Pass 201 Dumps is the best solution to pass the F5 201 – TMOS Administration Exam.
The F5 201 Dumps with 91 up-to-date exam questions and answers have been released from Lead4Pass.com, with PDF files and a VCE mock exam engine, as well as 365 days of free updates to help you truly pass the F5 201 – TMOS Administration exam.
Take advantage of the F5 201 – TMOS Administration exam solution, using F5 201 dumps https://www.leads4pass.com/201.html, to help you win.
Experience some F5 201 Dumps exam questions online:
Tips: The best experience is the test, the answer will be announced at the end of the article
QUESTION 1:
Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the BIG-IP?
A. No SSL certificates are required on the BIG-IP.
B. The BIG-IP\’s SSL certificates must only exist.
C. The BIG-IP\’s SSL certificates must be issued from a certificate authority.
D. The BIG-IP\’s SSL certificates must be created within the company hosting the BIG-IPs.
QUESTION 2:
Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?
A. The SNAT must be enabled for all VLANs.
B. The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
C. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
D. The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.
QUESTION 3:
Which two statements describe differences between the active and standby systems? (Choose two.)
A. Monitors are performed only by the active system.
B. Failover triggers only cause changes on the active system.
C. Virtual server addresses are hosted only by the active system.
D. Configuration changes can only be made on the active system.
E. Floating selfIP addresses are hosted only by the active system.
QUESTION 4:
A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address
when the associated packet is sent to the pool member?
A. 200.200.1.1
B. 150.150.10.11
C. Floating self IP address on VLAN where the packet leaves the system
D. Floating self IP address on VLAN where the packet arrives on the system
QUESTION 5:
Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing? (Choose three.)
A. CLIENT_DATA
B. SERVER_DATA
C. HTTP_REQUEST
D. HTTP_RESPONSE
E. CLIENT_ACCEPTED
F. SERVER_SELECTED
G. SERVER_CONNECTED
QUESTION 6:
Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server\’s destination port were not 443?
A. SSL termination could not be performed if the virtual server\’s port was not port 443.
B. Virtual servers with a ClientSSL profile are always configured with a destination port of 443.
C. As long as client traffic was directed to the alternate port, the virtual server would work as intended.
D. Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port
443.
QUESTION 7:
Which two methods can be used to determine which BIG-IP is currently active? (Choose two.)
A. The bigtop command displays the status.
B. Only the active system\’s configuration screens are active.
C. The status (Active/Standby) is embedded in the command prompt.
D. The ifconfig a command displays the floating addresses on the active system.
QUESTION 8:
The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B. Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection?
A. 10.10.20.1:80
B. 10.10.20.2:80
C. 10.10.20.3:80
D. 10.10.20.4:80
E. 10.10.20.5:80
QUESTION 9:
Which statement is true regarding failover?
A. Hardware failover is disabled by default.
B. Hardware failover can be used in conjunction with network failover.
C. If the hardware failover cable is disconnected, both BIGIP devices will always assume the active role.
D. By default, hardware fail over detects voltage across the failover cable and monitors traffic across the internal VLAN.
QUESTION 10:
Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.
A. Most templates, such as http and tcp, are as effective as customized monitors.
B. Monitor template customization is only a matter of preference, not an issue of effectiveness or performance.
C. Most templates, such as https, should have the receive rule customized to make the monitor more robust.
D. While some templates, such as ftp, must be customized, those that can be used without modification are not improved by specific changes.
QUESTION 11:
When configuring a pool member\’s monitor, which three association options are available? (Choose three.)
A. inherit the pool\’s monitor
B. inherit the node\’s monitor
C. configure a default monitor
D. assign a monitor to the specific member
E. do not assign any monitor to the specific member
QUESTION 12:
How is MAC masquerading configured?
A. Specify the desired MAC address for each VLAN for which you want this feature enabled.
B. Specify the desired MAC address for each selfIP address for which you want this feature enabled.
C. Specify the desired MAC address for each VLAN on the active system and synchronize the systems.
D. Specify the desired MAC address for each floating selfIP address for which you want this feature enabled.
QUESTION 13:
Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all?
A. The process should always be run from the standby system.
B. The process should always be run from the system with the latest configuration.
C. The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.
D. Multiple files, including /config/bigip.conf and /config/bigip_base.conf, are synchronized (made identical) each time the process is run.
Verify the answer:
| Numbers: | Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 |
| Answers: | A | C | CE | C | ACE | C | AC | A | B | C | ADE | A | C |
[Google Drive] Download the F5 201 Dumps exam questions and answers above:https://drive.google.com/file/d/1cj81qXpy3vJbuAugA3d_VWV0tNO5JqqA/
I can confidently tell all candidates: Lead4Pass 201 Dumps exam questions can help you improve your study efficiency, save time and exam cost, and ultimately help you successfully pass the F5 201 – TMOS Administration Exam.
Based on the above, so the best solution for the F5 201 – TMOS Administration Exam is to practice F5 201 Dumps https://www.leads4pass.com/201.html (91 Q&A).